|
|
|
|
|
|
Truck
|
|
|
|
Traction/Steering:
|
4x4x4
|
|
|
Frame:
|
With twin body side member
Front tow point (back tow point on request)
|
|
|
Outriggers:
|
No. 4 independent hydraulic outriggers onto hydraulic
beams
Outrigger beams can be fully retracted, partially or fully extended
Outrigger controls in the operation cab
|
|
|
Engine:
|
CUMMINS QSB5.9-C:
No. 6 in-line cylinders - displacement: 5.88 cu dm - water cooling - turbo
supercharger
Max. power 153 kW at 2200 rpm - Max. torque 929 Nm at 1300 rpm
97/68/CE Step 2 approved
|
|
|
Tank:
|
240 l
|
|
|
Transmission:
|
DANA series 32000:
Powershift-type transmission with torque converter
3 + 3 forward speeds and 3 + 3 reverse speed: slow and fast speed mode
Automatic engagement of 4WD after selecting slow speed mode
|
|
|
Brakes:
|
Operating brakes: double-circuit hydro-pneumatic drum
brakes on all wheels
Parking/Emergency brake: negative action onto front transmission shaft
Pneumatic spring brake
|
|
|
Axles:
|
No. 2 driving/steering axles equipped with planetary
gearboxes into hubs. Rear differential lock (selectable only in 4WD
mode). On request, front differential lock.
|
|
|
Suspension:
|
Stiff suspension for front axle, swinging suspension for
rear axle
Rear suspension is automatically locked by hydraulic jacks if lifting boom
is not aligned with centreline within front crane area
Manual stop for rear suspension locking in operating cab
|
|
|
Steering:
|
Hydrostatic steering controlled by steering wheel into
the operating cab
Steering of front axle alone or both axles in concentric or crab mode
|
|
|
Tyres:
|
No. 4 18.00R25 tubeless tyres (A600S) and No. 4 23.5R25 tubeless
tyres (A600L)
On request, no. 4 26.5R25 tubeless tyres (A600L)
|
|
|
|
|
|
|
Upper Structure
|
|
|
|
Boom:
|
No. 4 octagonal elements
|
|
|
Lifting:
|
No. 1 double action hydraulic jack
Boom inclination: -2° to +78°
|
|
|
Extension:
|
Separate extension of element 2 through double action
hydraulic jack. Continuous proportional extension of elements 3 and 4
through double action hyraulic jack and inner chain-driven system.
Extension under partial load possible.
|
|
|
Winch:
|
Controlled by double displacement hydraulic motor
equipped with axial pistons and planetary gearbox. Automatic negative
brake for winch lowering. Cable tensioner. Two different
rotation speeds.
Rope diameter 18 mm length 200 m. Max. lifting capacity 5300 daN.
On request, auxiliary winch controlled by hydraulic motor equipped with
axial pistons and planetary gearbox. Automatic negative brake for
winch lowering.
Rope clamp. Two different rotation speeds. Rope diameter 15 mm
length 150 m.
Max. lifting capacity 3800 daN.
|
|
|
Slewing:
|
360° non-stop rotation controlled by hydraulic motor
equipped with planetary gearbox on slewing ring having double ball ring and
inner toothing. Automatic negative brake. Brake release for direct
alignment of boom along load vertical line.
|
|
|
Operating cab:
|
Sliding door. Wide visibility. Equipped with
heating system. Front and upper anti-breaking window with windscreen
wiper. Upper and back windows can be opened. Fully adjustable seat
onto shockproof suspensions. Equipped with tiltable arm rests with
integrated hand controls for crane operation.
|
|
|
Safety:
|
Stop valves onto extension/lifting boom jacks and
outriggers
Max. pressure valves for each hydraulic circuit
Balancing braking valve for the slewing unit
Balancing braking valve for the winch
Limit switch onto boom head for hoisting block lift
Limit switch for having three winding turns around the winch
Load limiting device with indicator for: boom inclination, boom
length, load weight, max. load which can be lifted
|
|
|
|
|
|
|
Systems
|
|
|
|
Hydraulic system:
|
Feeding: no. 1 double gear pump and no. 1 double vane
pump
Movement control: distributors controlled by hydraulic hand controls.
More proportional operations can be carried out at the same time
Outrigger control: solenoid valves controlled by separate buttons
Filtering: No. 2 cartridge filter in return circuit
Heat exchanger for oil cooling-down
|
|
|
Electric system:
|
24 V, 75 A generator and No. 2 132 Ah batteries
Lighting devices in compliance with current EU directives
|
|
|
Pneumatic system:
|
190 cu cm compressor, No. 2 45 l reservoirs and drier
Auxiliary air intake and tyre inflating kit
|
|
|
|
|
|
|
Options
- Additional pulley onto boom head
- "A" jib 1.65 m long
- Lattice extension 10 m long
- Lattice extension 0.7 m + 7.3 m long
- Lattice extension 0.7 m + 7.3 m + 6.0 m long
- Lattice extension 0.7 m + 7.3 m + 6.0 m + 6.0 m
long
- Air conditioning/heating system into operating cab
- Spare wheel
- Operating kit for temperatures up to -20°C
- Operating kit for temperatures up to +45°C
|
|
|
|
